Example: Administrative Distance

Example: Administrative Distance

If we want to reach Pc2 (60.0.0.10) from Pc1 (10.0.0.10), There are two possible ways are available. Both are same distance only.

If we configure like above picture. It will work as load balance.In 256 Mbps Speed Connection, Packet will be forwarded with high speed.But in 64 Mbps Speed Connection, Packet will be arrived with delay. So Data queue will increase.So Set AD Value Lower for 256 Mbps Connection.

R1:

By default, AD Value is 1 for static route

So change AD Value higher than 1 for 64 Mbps connection

R1(config)#ip route 60.0.0.0 255.0.0.0 30.0.0.2 2

Here AD Value is Changed to 2

R4:

R4(config)#ip route 10.0.0.0 255.0.0.0 50.0.0.1 2

Here AD value in R4 changed to avoid load balancing of reply packet.

Now 256 Mbps Connection will work.
If 256 Mbps Connection disconnected/failed, then 64 Mbps Connection will work.